www.fseries.info notice board

The complete resource for Australian 
Ford F-Series owners and enthusiasts.

Site designed and maintained by Epsoft Computer Services Email: robert@fseries.info

Advertise your truck or accessories here for free! Just fill out the form below and we'll put it here.

Please report spam or abuse to robert@fseries.info


Category: Other
slide on campervan fits on our '79 LWB F100, Clarence Valley region.
Price: $4,500
Debbie Wich 02 66427972
dmmwich@gmail.com

ID:9719 Posted: 22/01/2012 Expires: 21/01/2013 REMOVE


Category: Truck Parts for Sale
**Tray** LWB Ultimate custom work tray. 3 tool boxes,6ft drawer, racks. Located Vic. can send photos
Price: $3400
Rhys 0448 197 999
rhyscantwell@hotmail.com

ID:9706 Posted: 10/01/2012 Expires: 09/01/2013 REMOVE


Category: Truck Parts Wanted
Style side tub for 82 LWB in Victoria must be very good to excellent condition
Price: neg
Rhys 0448197999
rhyscantwell@hotmail.com

ID:9705 Posted: 10/01/2012 Expires: 09/01/2013 REMOVE


Category: Truck Parts Wanted
I'm after a SWB tub for a 1983 F100 (1981 to 1987 would suit I think),
michael 0412 019 881
michael@deckit.com.au

ID:9703 Posted: 09/01/2012 REMOVE


Category: Truck Parts Wanted
I have a 1973 F350 300 straight 6 2 wd long wheel base flat tray and I want to fit power steernig need advice and parts please. cheers Ross
Price: ????
ROSS 0438351495
ronjenkins126@gmail.com

ID:9695 Posted: 30/12/2011 REMOVE


Category: Truck Parts Wanted
I have a 1973 F350 300 straight 6 2 wd long wheel base flat tray and I want to fit power steernig need advice and parts please. cheers Ross
Price: ????
ROSS 0438351495
ronjenkins126@gmail.com

ID:9694 Posted: 30/12/2011 REMOVE


Category: Other
Hi I am looking for owners manual and repair manual for my f250 ex-ambulance with 302 winsors motor, auto tras. with roll cage.
bob 0466969869
bobcanfixit@gmail.com

ID:9693 Posted: 30/12/2011 Expires: 29/12/2012 REMOVE


Category: Help Wanted
I'm looking to purchase replacement steering parts for my 1985 RHD Bronco. Can I purchase these from US suppliers or are there LHD/RHD differences that I need to be aware of ? I havent seen any differences mentioned in the catalogues but I just want to double check before purchasing from US. Im looking at the followng parts: balljoints (upper & lower) drag link (LHD/RHD differences?) tie rods (LHD/RHD differences?) Any help from other aussies (RHD owners) out there that have already been through a steering rebuild would be much appreciated. Cheers Scott
Scott
bb60olds@gmail.com

ID:9692 Posted: 29/12/2011 REMOVE


Category: Trucks Wanted
1993 onwards F250 F350 prefer 4wd but will consider 2wd if its a 7.3 diesel Or an extra / extended cab
Price: varies depending on vehicle
Steve 0435130099
cyberdiamond@email.com

ID:9687 Posted: 15/12/2011 REMOVE


Category: Trucks For Sale
1977 4x4 long wheel base f100, 4 inch lift kit 351 2v clevo, mag wheels with 35 inch mud tyres, couple of spots of surface rust and some in the tray
Price: $5000
drew 0420370866
drewsmclean@hotmail.com

ID:9681 Posted: 08/12/2011 REMOVE


Category: Truck Parts Wanted
I am after a LWB well side/style side for a 91 f150. Have great condition 2.7m long AL tray with racks which I am hoping to exchange swap or sell.
Adam 0422297100
adamjohnchristie@gmail.com

ID:9680 Posted: 06/12/2011 REMOVE


Category: Truck Parts for Sale
FOR SALE F100 FOR PARTS INC 9INCH DIFF GEARBOX, CAB & CHASSIS TAILSHAFT PLUS OTHER EXTRAS $900.00 THE LOT ONO PH 0437935417 Price: $4000.00 ONO James Lamshed 0437935417 jameslamshed@yahoo.com.au
Price: $900.00
James Lamshed 0437935417
jameslamshed@yahoo.com.au

ID:9650 Posted: 28/11/2011 Expires: 27/11/2012 REMOVE


Category: Trucks For Sale
I have a 1986 bronco and a f150 1987 tray back for sale in the best condition i have ever seen in a bronco and f150.first to see will buy they are that good.
Price: 10,000 each
phil kagelaris 0403065138
pkcowboy@live.com.au

ID:9631 Posted: 25/11/2011 REMOVE


Category: Trucks Wanted
78 79 351 auto swb
Price: what ever
chad 0403659520
chadbyers1978@gmail.com

ID:9593 Posted: 18/11/2011 REMOVE


Category: Help Wanted
HI CAN ANYONE PLEASE TELL ME WHAT I NEED TO FIT 280C POWERSTEER UNIT TO MY 1975 F100 CHEERS AL
AL
BARTERTOWN@HOTMAIL.COM

ID:9582 Posted: 16/11/2011 REMOVE


Category: Help Wanted
Advise needed for new comer to the F150 series.Have a 4x4 F150 with 302.Will a 1984 same,parts fit mine eg auto column shit box-rear fuel tank-power steering-hand brake assy.?
sonny pan 0434 029 386
sonny_445@hotmail.com

ID:9499 Posted: 27/10/2011 Expires: 26/10/2012 REMOVE


Category: Trucks Wanted
f100 80 to 85 good cnd prefer xlt sound veh only right dollars for right veh 4x4 or 2wd
dave kinnaird 0424160190
dkinnaird7@bigpond.com

ID:9475 Posted: 23/10/2011 REMOVE


Category: Help Wanted
I would like information re importing a new F250-F350(6.7ltr)Crewcab.What do i need to be aware of and do when importing a truck from the US, and who would be the best for conversion and complience in Aust. What sort of money are we talking. They want $160,000.00 for a new F350 crewcab 6.7 in WA.
Joe Sherrington 0419252433
norland@westnet.com.au

ID:9468 Posted: 21/10/2011 REMOVE


Category: Other
Hi all if any one would like any advice on how to do a conversion or would like to know what goes were on what model just ask. I have 25 years on f-trucks.
Price: nil
cowboy 0403065138
pkcowboy@live.com.au

ID:9454 Posted: 19/10/2011 REMOVE


Category: Truck Parts Wanted
Hi all Im looking for a front diff conversion for my 1986 f-250, I would like a dana 60,8 stud diff with all the trimings or a complete chassis. If u have any think that fits the bill please call.
Price: the going rate
cowboy 0403065138
pkcowboy@live.com.au

ID:9453 Posted: 19/10/2011 Expires: 01/01/2020 REMOVE


Category: Truck Parts Wanted
rust repair section that holds windshield wiper arms
Price: neg
terry williams 03 51742298
terrywilliams16@hotmail.com

ID:9424 Posted: 14/10/2011 REMOVE


Category: Trucks Wanted
351 c6 auto 78 model
Price: 10000
chadraymondbyers 0403659520
chadbyers1978@gmail.com

ID:9397 Posted: 10/10/2011 REMOVE


Category: Truck Parts Wanted
isuzu deisel engine conversion for 79 f350
Price: neg
d porter 0427334455

ID:9360 Posted: 05/10/2011 REMOVE


Category: Truck Parts Wanted
wanted 85-90 f150/250 cab/chassie,ex-ambo better for priv project
budgie
budgie333@optusnet.com.au

ID:9293 Posted: 25/09/2011 Expires: 24/09/2012 REMOVE


Category: Help Wanted
I AM A RETIRED NSW POLICE OFFICER AND I HAVE BEEN CONTACTED BY A FRIEND WHO HAS BEEN ASKED TO FIND AN OLD POLICE F100 PADDY WAGON. I RECALL SOME TIME AGO, THERE WAS A RETIRED POLICE OFFICER WHO RESTORED AN F100. I THINK IT WAS IN ONE OF THE POLICE NEWS. HOWEVER, APPARENTLY THE NSW POLICE ARE LOOKING FOR SUCH A VEHICLE TO TAKE PART IN THE 150 YEAR ANIVERSARY TO BE HELD AT GOULBURN. If you can assist, please contact the admin of this web site and we will pass the info onto Roy.
ROY ADAMS
robert@fseries.info

ID:9227 Posted: 13/09/2011 Expires: 12/09/2012 REMOVE


Category: Truck Parts Wanted
Front drive shaft F100 1983 model. Under dash wiper brackets to suit 1983 F100.
Price: NEGOTIABLE
Dean Rae 0747703371
dean.k4d@hotmail.com

ID:9192 Posted: 08/09/2011 REMOVE


Category: Trucks Wanted
351 c6 auto good condtion
Price: 5000-10000
chad raymond byers 0403659520
chadbyers1978@gmail.com

ID:9184 Posted: 07/09/2011 REMOVE


Category: Truck Parts Wanted
Standard or widened steel wheels (not sunrasiers)5 stud to suit 68/72 2wd.
Sean Millsom 0263736479
Sean_millsom@harboursat.com.au

ID:9116 Posted: 23/08/2011 REMOVE


Category: Trucks For Sale
F100 1973 Automatic 302 Cleveland (done approx 10000 klms since new engine fitted,dual fuel, wide wheels, bull bar, registered Sept
Price: $4000 ono
Neil Haselgrove 0886253928
judithhaselgrove@bigpond.com

ID:9056 Posted: 11/08/2011 REMOVE


Category: Trucks Wanted
Ford f100 wanted willing to pay $5,000
Price: $5000
Cameron 0430869965
Cameron.bryden85@hotmail.com

ID:9052 Posted: 10/08/2011 REMOVE


Category: Truck Parts Wanted
wanted 76 f-100 bonnett
andrew cox 0466657568
www.tassietiger362000@yahoo.com

ID:8973 Posted: 23/07/2011 REMOVE


Category: Trucks For Sale
FOR SALE RUNNING 70 MODEL F 100 351 WINDSOR V8 5.8 LITRE 9INCH DIFF 4 SPEED GEARBOX PLUS SPARE F100 FOR PARTS INC 9INCH DIFF GEARBOX, CAB & CHASSIS TAILSHAFT PLUS OTHER EXTRAS $4000.00 THE LOT ONO PH 0437935417
Price: $4000.00 ONO
James Lamshed 0437935417
jameslamshed@yahoo.com.au

ID:8905 Posted: 07/07/2011 REMOVE


Category: Trucks Wanted
250 or 350 4wd lwb flat tray at least 3.3m v8 auto or manual, gas/petrol,
Price: max $20,000
tony 0417226011
gypsytony7@hotmail.com

ID:8841 Posted: 27/06/2011 REMOVE


Category: Truck Parts for Sale
wrecking 76 swb styleside f100 6 cyl auto most parts available
Price: from $5
dave maxwell 0430420185
pierced75@hotmail.com

ID:8817 Posted: 22/06/2011 REMOVE


Category: Trucks For Sale
F150 1988 4wd auto - lpg/unleaded. white. has many parts replaced & repaired, some rust, still reg til may. 300 litre gas tank. tub ute with canopy. Bullbar/Towbar. Bench seat. CD player. Suit repair/restore/parts.Located south coast nsw near vic/nsw border area. Contact Peter by email. Price: $5,500 Peter saffrhon@gmail.com
Price: $5,500
Peter
saffrhon@gmail.com

ID:7965 Posted: 17/05/2011 REMOVE


Category: Truck Parts Wanted
Does any one have a 4x4 73-79 f100 power steering box for sale?
Mitch 0447536569
m-smith11@hotmail.com

ID:7676 Posted: 06/05/2011 REMOVE


Category: Truck Parts Wanted
needed ....2x 1984 fseries tubs
marc 02 63796925
dainmar@live.com.au

ID:7306 Posted: 22/04/2011 REMOVE


Category: Truck Parts Wanted
hotwire mags 15x8inch suit
Price: ?
eric 0418414610

ID:7137 Posted: 16/04/2011 REMOVE


Category: Truck Parts Wanted
Wanted Bronco/F series front bumper around 1984 model.
Scott 0434 296791
sthrupp69@gmail.com

ID:6657 Posted: 18/03/2011 REMOVE


Category: Truck Parts Wanted
Anyone have a spare 1978 F100 windscreen? Rubbers would be a bonus. Cheers
Steve 0414734977
steve_hay68@hotmail.com

ID:6396 Posted: 02/03/2011 REMOVE


Category: Truck Parts for Sale
1977 f100 cab white cab if in not to bad conditon but will need to replace hinges on the back door and the glass
Price: make an offer
Mitch 0447536569
m-smith11@hotmail.com

ID:6269 Posted: 21/02/2011 REMOVE


Category: Truck Parts Wanted
Looking for a 1977-79 F100 cab bare or complete
Price: offer
Mitch 0447536569
m-smith11@hotmail.com

ID:6265 Posted: 21/02/2011 REMOVE


Category: Trucks For Sale
F250 extracab SWB tray &canopy.dark green/gray int.460 V8 EFI OD auto 3.5 diff.Factory heavy duty 7500kg towbar .factory alloy wheels only 166ks exlent cond.&driver
Price: $25000 ono
Ian
trishnwags@vic.australis.com.au

ID:5586 Posted: 02/01/2011 REMOVE


Category: Help Wanted
i have a 73 250 2wd single rear wheels camper, 300/str6,4speed box i want to covert to 4wd. advice please, and cost??
Price: ???
tony taylor 0417226011
gypsytony7@hotmail.com

ID:5565 Posted: 31/12/2010 REMOVE


Category: Trucks For Sale
1986 F350 Tilt/slide Towtruck with Alloy challenger slider.recent recon 460 Bigblock, auto tras on straight gas in exellent condition.
Price: $28000
Arthur 0412147631
arthur@fullontowing.com.au

ID:5152 Posted: 10/12/2010 REMOVE


Category: Truck Parts Wanted
Wanted 70's model front grill surround and comfortable bench seat or large buckets
Price: negotiable
Peter H 02 64562606
scfp@exemail.com.au

ID:5088 Posted: 03/12/2010 REMOVE


Category: Truck Parts for Sale
nissan 260C power steering box and pump for power steer conversion for f100 trucks early series
Price: 2000
warren 0422639588
wjh2@bigpond.com

ID:3883 Posted: 07/09/2010 REMOVE


Category: Truck Parts Wanted
I'm after a SWB tub for a 1983 F100 (1981 to 1987 would suit I think), preferably located in Vic
pete 0425711726
reticence100@yahoo.com.au

ID:3281 Posted: 10/08/2010 REMOVE


Category: Truck Parts for Sale
4 Truck wheels: 16x8 8x165.1 Stud pattern Eagle Alloys series 186 (i think) brand new $800 for the 4. Also 4 brand new LT315X75XR16 kumho road venture kl788 all terrain tyres for sale. Done less than a 100 km, $800.
Price: $800
Shaun Lingham 0414780373

ID:3117 Posted: 02/08/2010 REMOVE


Category: Truck Parts Wanted
hi i would like any info on 1961 f600s also need a radiator /brake parts
daniel o412787985
mail4jo@bigpond.com

ID:2777 Posted: 05/07/2010 REMOVE


Category: Truck Parts Wanted
i have a 1979 f-100 4x2 i am wanting to convert it to powersteering has anybody got a kit for sale please
Price: negotiable
gilby 0409204117

ID:2716 Posted: 25/06/2010 REMOVE


Category: Truck Parts Wanted
wanting a complete dash in good working condition for a 1976 f100 4x2 v8 auto,thanks.
Price: negotiable
mick o'connell 0406286200

ID:2611 Posted: 07/06/2010 REMOVE


Category: Truck Parts Wanted
I have a 1977 f250 single wheeled 4.14 back end and am chasing a dana diff 3.55 or lower, 8 stud for highway use. Any info appreciated
paul 0403147433
humamus@skymesh.com.au

ID:2577 Posted: 02/06/2010 REMOVE


Category: Truck Parts for Sale
F100 1984 XLT styleside tub in original two tone paint and trim, with Bronco canopy (average condition for canopy). also the tub has a bench seat with roll cage and seat belts all engineered for a walk through set up. Has a steel rear stepup as well. I am looking to flat top my ute in timber. Call on my mobile anytime (Victoria)
Price: negotiable
David 0401 164 163
sferchie@gmail.com

ID:2552 Posted: 29/05/2010 REMOVE


Category: Trucks Wanted
Wanted RHD 1956 F100, will look at any available.
Price: >$20000
Adam 0413621222
clance66@optusnet.com.au

ID:2549 Posted: 29/05/2010 REMOVE


Category: Trucks For Sale
f350 bananaback towtruck 1974,brand new 351clevo, 5sp man,dual fuel,twin gas tanks in date'new radiator new 2pack paint(polar white) new carpet,alloy bullbar'suit lowered cars aswell'near new 10000pound (5tonne) winch,new tyres,brakes,diff axles etc;a rare find for enthusiast or owner operater;call me for inspection, buy it unreg or registered for asking price ono
Price: $12500-$15000 ono
brett stewart 0418252082
barneysbucks@three.com.au

ID:2522 Posted: 25/05/2010 REMOVE


Category: Help Wanted
can some one tell us if i can put my F100 cab 81 on to a F350 78 chassis
John 0417808769
goodegore@activ8.net.au

ID:2423 Posted: 10/05/2010 REMOVE


Category: Help Wanted
please can some one tell us if i can put my F100 cab 81 on to a F350 78 chassis
John 0417808769
goodegore@activ8.net.au

ID:2424 Posted: 10/05/2010 REMOVE


Category: Trucks For Sale
I have parts in good condition for sale if interested kindly give me a mail...
Price: AFFORDABLE
James
j.raymond2000@gmail.com

ID:2402 Posted: 06/05/2010 REMOVE


Category: Truck Parts Wanted
F250 05? onwards, alloy standard rim set wanted Thankyou
Price: offers
Wayne Hughes 041898201/8
wayne@caravilla.com.au

ID:2301 Posted: 16/04/2010 REMOVE


Category: Truck Parts Wanted
Looking for a 81 to 85 swb dually tub in good to excellent cond will pay good $$$ for the right one im located in melb but am prepared to travel
Price: $$$$$$$$$$
Adrian 0433533332
v84runner@hotmail.com

ID:2181 Posted: 28/03/2010 REMOVE


Category: Trucks Wanted
ford bronco swb 80 upwards no rust in firewall thanks
Price: negotable
brian brown 0409421027
brianbrown@virginbroadband.com.au

ID:2000 Posted: 05/03/2010 REMOVE


Category: Truck Parts for Sale
62 F100 cab chassis. S series Jag front end with power rack and pinion steering and monster brakes, fitted by OZ Rods. Drove like a car when it was on the road. Was 351C and C4 9". No diff. Needs rebuild. Also 74 F350 Cab chassis. 302C, 4spd. Will consider wrecking out either as I'm keen to keep some bits for my 65 F350 project. Will consider partial or full swap for other parts I need. Also keen for power steering conversion for my 65 F350. Any info may help. Cheers, Ron.
Price: Negotiable.
Ron 0438096939
ron_ahl@iprimus.com.au

ID:1788 Posted: 19/02/2010 REMOVE


Category: Trucks For Sale
79 F350 BEAVERTAIL TOW TRUCK 351C C6 AUTO DANA DIFF NEW 9000 POUND WINCH POWER STEERING TINT WINDOWS REGO RWC BULL BAR LOTS OF TIME@MONEY SPENT ON THIS TRUCK NEW DRAG LINK/TIE RODS NEW WINDSCREEN NEW CARPET NEW DOOR SEALS NEW KING PINS NEW GRILL 3 BIG GAS TANKS ALL IN DATE 2 NEW BATTERYS HEAVY DUTY TOW BAR NEW BRAKES ALL ROUND NEW BRAKE BOOSTER /MASTER CYL RECO DOOR HINGES NEW NOSE CONE NEW ACCELERATOR CABEL NEW ENGINE MOUNTS HEAPS MORE NEW PARTS MUST GO UP GRADING TO NEW TRUCK
Price: 11999.OO
JASON 0432031746
JRP3088@HOTMAIL.COM

ID:1711 Posted: 09/02/2010 Expires: 07/07/2100 REMOVE


Category: Truck Parts Wanted
i am chasing some bucket seats and console/third seat for a 1990 f150 or if anyone knows of a lter style seat conversion i can do ? any help would be great!!
Price: ?????
Andrew Patterson 0411555595
actbm@bigpond.net.au

ID:1645 Posted: 02/02/2010 REMOVE


Category: Truck Parts Wanted
I am chasing an under dash a/c unit for a 79 truck full lenght under dash type or the maker of these came out in the 77 to 79 models after market type unit
Travis 0409424197

ID:1420 Posted: 07/01/2010 REMOVE


Category: (Please select one)
For Sale. Unfinished 1976 F350 Project Vehicle. Repainted (blue metallic), Fully reconditioned 460 Big Block plus C6 auto. New rubber kit. Reupholstered bench seat.
Price: Offers
Garry 0418 413 163
garry.ashley@bigpond.com

ID:1404 Posted: 01/01/2010 REMOVE


Category: Trucks For Sale
'70 F100 RHD SWB pick up.No rust in cab,doors,guards etc very straight.Dropped D/brake f/end,reset rear springs,new shockers,kinpins,bushes,interior,seat,h/liner,carpets,matts,tank cover etc.New green tint glass,rubbers,seals,ventwindow rubber,glass channels etc.New 80lt LPG tank,new grille & h/light ends,rechromed F&R B/bars,new front tyres,eng/bay & interior painted in 2K green met.Just needs minor body work & repaint.No motor or g/box,but set up for V8.Excellent project to finish,spent many $$$$$ already..
Price: $5700-00
noray 0417-345-919
norayr@virginbroadband.com.au

ID:1375 Posted: 24/12/2009 REMOVE


Category: Truck Parts for Sale
1976 F-100 LWB chassie.Bare bones no running gear,suspenion,steering or any bolt ons
Price: $200-00
noray 0417-345-919
norayr@virginbroadband.com.au

ID:1362 Posted: 21/12/2009 REMOVE


Category: Trucks For Sale
1978 f350 gen 15,000 kms cab chassy (NO RUST) 351 clev engine truck has been in shed for 20 odd years as project tow truck that didnt make it real offers only
Price: neg
simon 0424236371
simon@miniexcavators.com.au

ID:1346 Posted: 18/12/2009 REMOVE


Category: Trucks For Sale
2001 F 250 Lariat trim 7.3 turbo auto LWB 4x2 270ks, LSD, bull bar, USA built vehicle.
Price: 54500.00
Denis Rowan 0408246465
denisr@aquafortisaustralia.com

ID:1311 Posted: 07/12/2009 REMOVE


Category: Truck Parts Wanted
needed 1 exterior steel preferd sun visior for front windscreen to suit 1990 ex ambo twin cab
Price: 100 fair cond
jack 0404197099
cvtm2003@yahoo.com

ID:1277 Posted: 01/12/2009 REMOVE


Category: Truck Parts Wanted
I have a 78 F350 with a dodgy 4 speed New Process Gearbox. What 5 Speed box will go in and as an added extra I would love to add power steering. Cash paid.
Todd Johnston 0418906288
todd@eganit.com

ID:1274 Posted: 01/12/2009 REMOVE


Category: Trucks Wanted
F450 cab chassis with extra cab and long wheel base would be real nice
joe 0418505502

ID:1231 Posted: 21/11/2009 REMOVE


Category: Trucks For Sale
F350 LONGWHEEL BASE CRADLE TOW TRUCK.351, 4 SPEED ,SRAIGHT GAS ,HEAPS OF MONEY SPENT. EG.CUSTOM CANDY PAINT ,LEATHER TRIM ,BILLET WHEELS,LED LIGHTS & HEAPS MORE.
Price: REALISTIC OFFERS.
jason. 0412488661
jjperformance@ozemail.com.au

ID:1213 Posted: 13/11/2009 Expires: 09/12/2022 REMOVE


Category: Truck Parts for Sale
Hi all I have a fully reconditioned 351 clevo 3/4 motor for sale. I also have 2 351 cast iron yella terra heads in good but needs new valves.
Geoffrey McQuillan 0427872401
helen.geofmcquillan@bigpond.com

ID:1098 Posted: 10/09/2009 REMOVE


Category: Truck Parts Wanted
Hi everyone I have a nissan 280c power steering box to fit to my 1976 f100 but i am lacking a pitman arm. Can you Help?
Geoff Mc Quillan 0427872401
helen.geofmcquillan@bigpond.com

ID:1097 Posted: 10/09/2009 REMOVE


Category: Truck Parts Wanted
Hello im looking for some f350 alloy rims. from south australia
Price: any
Peter Stagg 0412492378
staggtreeservice@gmail.com

ID:1092 Posted: 02/09/2009 REMOVE


Category: Help Wanted
I want to convert a F100 Ambulance into a Ute Flat Tray what do I do? What do I need to do? Has anyone done this? Any websites that can help?
Price: 100
Max
maxnyc2238@gmail.com

ID:1075 Posted: 24/08/2009 REMOVE


Category: Truck Parts Wanted
hi everyone i have a F600 need a water pump or a second hand motor canadian deep 6
paul brown 0431423397
pbrownw@gmail.com

ID:996 Posted: 05/07/2009 REMOVE


Category: Trucks For Sale
We are Australias only Full volume compliant importer & conversion specialist on the F150, F250, F350, F450 & F550.If you are looking for one of these trucks and you want it brand new then wait no more.We stock a good selection that is converted and ready to drive away.We also factory order vehicles to suit your spec straight out of the States if required.Contact me know for futher information.
Price: POA
Stewart 0423 671151
stewart.a@americanperformance.com.au

ID:992 Posted: 30/06/2009 REMOVE


Category: Trucks Wanted
80 to 85 model F100 SWB Pref XLT. Any considered.
Troy Kennedy 0244215609
troy_kennedys@yahoo.com.au

ID:989 Posted: 25/06/2009 REMOVE


Category: Help Wanted
I have an F100 Ambulance - Has anyone had any sucessful experience in converting Ambulance back into a ute? Looking for advice!!
Daniel Archer 0419195964
daniel.archer@downeredimining.com

ID:569 Posted: 21/01/2009 REMOVE


Category: Truck Parts for Sale
2005 Model Styleside Tub with Liner and Fibreglass Canopy All Silver in colour,in Excellent Condition
Brett Anderson 0438 754 744
aac.139@bigpond.com

ID:568 Posted: 18/01/2009 REMOVE


Category: Trucks Wanted
f350 good con prefer long wheel base
james 0412421443
ducati900s2@gmail.com

ID:562 Posted: 16/12/2008 REMOVE


Category: Trucks For Sale
1989 F350 XLT LARIAT DUAL CAB DUALLY ON GAS 460BB C6AUTO FULL 8FT6"TUB PWR WINDOWS PWR STEER A/C (NEW DIFF 3:55RATIO 6 NEW TYRES DONE 300KM)ALCOA ALLOY WHEELS 6SEATS VERY LOW KMS SAID TO BE THE BEST LARIAT IN AUST
Price: $27500
RICHIE 0408870372
tincan@dodo.com.au

ID:556 Posted: 23/11/2008 REMOVE


Category: Truck Parts for Sale
460BB C6AUTO COMPLETE WITH GAS KIT TWIN 3INCH S/STEEL EXHAUST ENGINE OIL COOLER AUTO OIL COOLER ENGINE MOUNTS EVERY THING YOU NEEDS TO CONVERT YOUR F TRUCK VERY LOW KMS STILL IN TRUCK
Price: $5500
RICHIE 0408870372
tincan@dodo.com.au

ID:557 Posted: 23/11/2008 REMOVE


Category: (Please select one)
86 4x4 auto 351 red power stering reg till apr needs tidy up
Price: 5000
shane (03)97812367
morsman.k.m@bigpond.com.au

ID:555 Posted: 21/11/2008 REMOVE


Category: Truck Parts Wanted
WANTED Ford 1985 F350 XLT front bumper in excellent condition
Rod
rod@rodstowing.com.au

ID:548 Posted: 28/10/2008 REMOVE


Category: Truck Parts for Sale
351 cleveland LPG motor, Gas heads and Gas cam run in 5000klms on petrol 4 barrel carby, comes with LPG unit not yet fitted,C4 auto,comes with free 1976 ambulance body,bullbar,towbar,sunraysia wheels Penrith,NSW.
Price: $3000 ono
Chris 0408211572

ID:547 Posted: 25/10/2008 REMOVE


Category: Trucks For Sale
1969-70 F100 ex ambulance 240 american motor 4 speed manual 250 running gear, discs, diff etc. sunraysias, good for parts or reno.
Price: $1000.00 ono
Chris 0408211572

ID:546 Posted: 25/10/2008 REMOVE


Category: Truck Parts Wanted
wanted over drive gearbox to suit 1983 ford f350 4x4 /alumium try,slide on camper,dull wheels or rims thanks peter
Price: any
peter j hooper 042-841-5332
jabba@bordernet.com.au

ID:534 Posted: 14/09/2008 REMOVE


Category: Trucks For Sale
bronco xlt ranger 1985 efi 302 petrol/gas just spent $5000.00 on her in e/c plis full 1985 bronco for spares
Price: $16000.00
peter j hooper 042-841-5332
jabba@bordernet.com.au

ID:535 Posted: 14/09/2008 REMOVE


Category: Help Wanted
F600 model 176A think its 57-58 year doing it up need all the info i can get thanks
tex
texs@lizzy.com.au

ID:532 Posted: 06/09/2008 REMOVE


Category: Truck Parts for Sale
1982 F100 Parts for sale including guards, cabin, doors, LWB tub, front end, bonnet.
Mark
phoenix08@bigpond.com.au

ID:448 Posted: 24/05/2008 REMOVE


Category: Trucks Wanted
Hi I am after a F100 81 model up to 87 model with power steering in good condition.
Price: $$$$$$$$
Elvis 0403 285 693
ejovanoski1@optusnet.com.au

ID:435 Posted: 03/05/2008 REMOVE


Category: Truck Parts Wanted
Looking for bucket seats from an 80-86 (later if they fit) Bronco or Ambulance and rails to fit '83 F100.
Mark 0403206311
mark@luckysix.net

ID:432 Posted: 29/04/2008 REMOVE


Category: Trucks For Sale
F550 XLT Super Duty V8 5spd auto 42,000km with Phoenix Nomad Phase 3 MOTORHOME. Vacuum trailer brakes, reversing camera, long range fuel and water, hot/cold shower, toilet, 4-burner gas and grill, 6-cd stackers in cab and back, aircon throughout. Exc condition. Comfy ride, tow your boat or float. MUST SELL.
Price: 129999 ono
Helen 0437 513 569
angela.hollams@soilwater.biz

ID:428 Posted: 25/04/2008 REMOVE


Category: Help Wanted
I have a 1973 f 350 flat tray dually 4 speed manualin good condition, but it has a rattly 300 cubic inch canadian 6 cylinder,how hard is it to convert to a v8 and add power steering? Is it worth the bother? Can anyone advise please?
ross 0438351495
ochill@southcom.com.au

ID:388 Posted: 18/02/2008 REMOVE


Category: Help Wanted
i have a 1970 f100 looking to fit power stering to her i have heard a nissan 280c box will work, is this correct if so what other parts are requird please help
julian 0418542021
j_sheraing@hotmail.com

ID:379 Posted: 28/01/2008 REMOVE


Category: Truck Parts Wanted
style side tray for swb 1977 f100 in or around brisbane qld.
leesa mcGill 0410310379
leesa_mcgill@yahoo.de

ID:377 Posted: 23/01/2008 REMOVE


Category: Trucks Wanted
1976 f100 swb auto trans
danny ottaway
danny@trussbuilders.com

ID:376 Posted: 23/01/2008 REMOVE


Category: Truck Parts for Sale
82 f100 4x4 complet 351 motor withs ac +power ster pump +alt +lpg on moter 4 baral carby all in good condition 4 speed box +ransfur box frunt tail shaff i up dated to 460 bb
Price: 2500..00
larry 0414258231
penweld@yahoo.com

ID:370 Posted: 16/01/2008 REMOVE


Category: Truck Parts Wanted
styleside tray to fit 67-72 f100 must be in good condition
kelvin 0410837950

ID:368 Posted: 13/01/2008 REMOVE


Category: Help Wanted
Can anyone give me a list of good web sites for decoding australian vin and engine numbers of f trucks built / assembled in aus . I currently have a f100 4wd 1976 but somethings on it r 1978 grill, front 44 dana diff id tag. also the vin number tells me its a 2wd chassis but looks like its had no mods.?
Heathy 0420284954
debheath@aapt.net.au

ID:367 Posted: 04/01/2008 REMOVE


Category: Truck Parts Wanted
Looking to convert my 79 SWB XLT 2wd 351 from manual to column shift C6. I have gearbox and converter, need everything else, woudl consider total parts package, or any individual stuff as well Located in Melbourne
Price: to be negotiated
Matt 0431444848

ID:363 Posted: 31/12/2007 REMOVE


Category: Trucks Wanted
F100 to F350 1975 to 1980 V8 in good condition thanks
Price: up to $7000-00
Peter 0407015454
peter-anderson@hotmail.com

ID:362 Posted: 29/12/2007 REMOVE


Category: Truck Parts Wanted
looking for a set of headers/extractors to suit 5.8lt efi 1991 f 350 manuel no need for immission gear dedicated gas system also an auto box for one or info on what auto box will drop in
rory
pucks711@iinet.com.au

ID:360 Posted: 24/12/2007 REMOVE


Category: Truck Parts Wanted
1972 Guards and doors required must be rust free
Price: Negotiable
phills72 0247586149

ID:353 Posted: 01/12/2007 REMOVE


Category: Trucks For Sale
f350 75mod,unleaded,2 tanks,duel wheels,green cab ,ext chassis,drop down sides/removable,351v8,all excellant cond,new paint 5 yr ago,checker plate floor,no dent or twists in truck,rego 6mths,can supply photos,can deliver at buyers exp,sell due to new buisness,hard to find in this cond,great horse float truck,new carpet/dash,also supply a 2tn car trailer 15 x 6.6mtr brand new with beaver tail and under neith ramps at extra cost,please contact any time,private seller.
Price: $9000.00
TONY 07 5499 2441,0407910891,0754989041
lintontrailers@optusnet.com.au

ID:349 Posted: 22/11/2007 REMOVE


Category: Trucks For Sale
81 f100 bronco shape cab chassis,6cyl 4 speed,9" diff.sunrasia wheels big tyres,new front end bushes,lpg,unfinished project
Price: $1,500
tyny 0403085062
kfarr1@vtown.com.au

ID:341 Posted: 12/11/2007 REMOVE


Category: Truck Parts Wanted
Have an 82 f100, a clapped out bench seat and a sore back. Looking for alternative seating,want to keep 3 seat capacity. Any suggestions appreciated. Will purchase current model seating if available at reasonable price.
Wayne 0417725296
lk.wb@bigpond.com

ID:330 Posted: 05/10/2007 Expires: 08/01/2029 REMOVE


Category: Help Wanted
Have a Nissan 260C p/steering box etc to do a conversion on a '78 F100 but need the correct pitman arm. Is it the ZD Fairlane one?
Karina Whale
karina_whale@hotmail.com

ID:326 Posted: 12/09/2007 REMOVE


Category: Truck Parts Wanted
Hi - I am after a tonneau cover to suit a 1970 SWB F100 (about 170cm wide x 2mtr long would prefer a rigid type) + a set of sunraysia / rims pref around Bris
Chris
chris@miaaow.com

ID:322 Posted: 04/09/2007 REMOVE


Category: Help Wanted
dose any know how i can get my 1973 F truck as low as possible.
Price: wat iver
Lee Elder 0411817993
kourptfmx69@hotmail.com

ID:320 Posted: 30/08/2007 REMOVE


Category: Truck Parts Wanted
I Need a style side tray to suit a 1973 or same as. rust is ok as long as repairable. In or around brisbane. will drive 500 km to get
Price: dependes
Lee Elder 0411817993
kourptfmx69@hotmail.com.au

ID:319 Posted: 30/08/2007 Expires: 08/05/2027 REMOVE


Category: Trucks For Sale
1978 F100 ex airforce Ambulance. 250 crossflow motor at present with 3 speed auto. On gas, air con, good condition, side steps, bull bar
Price: $3500
Simon 0405823291

ID:317 Posted: 28/08/2007 REMOVE


Category: Truck Parts Wanted
1969 F100 ALL PARTS REQUIRED. BONNET
DAVE 0434 129 090
ammour@optusnet.com.au

ID:315 Posted: 19/08/2007 REMOVE


Category: Truck Parts Wanted
in Brisbane and needing a diff for F350. Dual wheel 1980 model. Really appreciate any help or leads. Thanks. David.
Price: ?
DAVID WHYLE 07 3358 6309
orgmart@optusnet.com.au

ID:313 Posted: 11/08/2007 REMOVE


Category: Truck Parts Wanted
hi i need two front rims to suit my 86 f350 has any one got any or can you suggest an alternative please
Price: ?
tony 0415802391
tonymac@bigpond.net.au

ID:311 Posted: 10/08/2007 REMOVE


Category: Truck Parts for Sale
F250 2002 model front bumper bar, travelled only 300 kn=ms before alloy bar put on
Price: ono
David Bindley 0414966840
davidbindley@optusnet.com.au

ID:308 Posted: 08/08/2007 REMOVE


Category: Truck Parts for Sale
4 used F250 8 stud steel rims (off 2002 F250) for sale,2 caps and all wheel nuts included,best offer
Price: ono
David Bindley 0414966840
davidbindley@optusnet.com.au

ID:304 Posted: 02/08/2007 REMOVE


Category: Truck Parts Wanted
Looking for f250 4wd between the years of 1989 to 1994 for parts, dont care about body just the running gear.
Price: cheap
Nick Bell 0409044805
flips-n-kicks@hotmail.com

ID:301 Posted: 31/07/2007 REMOVE


Category: (Please select one)
81 model ford bronco for sale, just been restored from ground up but i bent the chassis, it still repairable but no more funds available i will sel the whole car or for parts, i would like to keep engine but that depends on offers, 4x 15/10 white rims,lpg system new interior, big 35" tyres mickey thompsom baja claw, 4" lift kit, soft top, unique rig 99% rust free a must see. i'm in brisbane
Price: depends what you want to buy
daniel (07) 33799761
maria_adriaens@.com

ID:297 Posted: 23/07/2007 REMOVE


Category: Truck Parts Wanted
hi guys im after a bare cab RHD 81-86 must be rust free. thanks
Price: up to 1500
dave 0432996729
davidg5542@optusnet.com.au

ID:294 Posted: 22/07/2007 Expires: 07/10/2023 REMOVE


Category: Help Wanted
I have a 1973 F-250 4x4 with a 360 and i would like to convert it to have power steering any information on where to get a conversion kit or how to make one would be greatly appreciated
Jeff
dumb_ass_97@hotmail.com

ID:285 Posted: 07/07/2007 REMOVE


Category: Truck Parts Wanted
1984 F100 UTE PARTS WANTED Doors, Front guards, Bench seat Intested in all 84 ute parts - email me / Thanks
Mark
phoenix08@bigpond.com.au

ID:281 Posted: 02/07/2007 REMOVE


Category: Help Wanted
I want to lift my 90 Model F150 4x4 Can anyone offer any advice?
George 0424333587
faity13@hotmail.com

ID:269 Posted: 09/06/2007 REMOVE


Category: Trucks Wanted
I am looking for a F100 , F250 V8 on gas 4WD would consider 2Wd with power steering and A/C all must be Working , wanting to tow a horse float please call Travis 0417141014
Travis Burns 0417141014
travis@makesafesecurity.com.au

ID:261 Posted: 11/05/2007 REMOVE


Category: Trucks For Sale
Bronco 1986, auto, remote central locking, 4inch lift kit, long range fuel tank, 100ltr LPG tank. Excellent mechanically and great fuel economy, just needs a good tidy up. $6580. Call Dean, 0413 430 465.
Price: 6580
Dean 0413430465

ID:260 Posted: 10/05/2007 REMOVE


Category: Truck Parts Wanted
Looking for some 8 stud sunraysia (etc) rims to suit a 92 F250. Any suggestions? Can I get 16" rims or do I need to use 15"?? Your thoughts please?
Price: ??
richard mcnay 0418 526852
prodrive@pipeline.com.au

ID:257 Posted: 30/04/2007 REMOVE


Category: Help Wanted
Anyone out there with any information on a power steering conversion for a 1977 F350. Have heard that a Nissan 260C Power steering Box will fit (almost). Would appreciate any correspondence with someone who has actually fitted a power steering conversion or who has any of the components for a conversion.
Les 0432 474 266
leswillis@activ8.net.au

ID:244 Posted: 23/03/2007 REMOVE


Category: Truck Parts Wanted
looking for a tub for a 1985 SWB in white preferably
Jan 043 990 3293
jangd@bigpond.net.au

ID:245 Posted: 23/03/2007 REMOVE


Category: Trucks Wanted
i want around a 78 model F100 SWB 4X4 351. any condition as long as drivable
Price: neg
Ben 0401 974 700
benjaminpchristian@bigpond.com

ID:241 Posted: 10/03/2007 REMOVE


Category: Truck Parts Wanted
I'm after an 1980-1986 F100 cab. Rusty is ok. Also any other parts and/or panels from the same era. Prefer in the Armidale NSW area .
Vernon 041 89 89 297
vernonvand@optusnet.com.au

ID:237 Posted: 06/02/2007 REMOVE


Category: Trucks For Sale
i have 1986 LWB F100 for slale
Price: cheap ask me
joseph pereira
joseph_pereira2@rediffmail.com

ID:235 Posted: 01/02/2007 REMOVE


Category: Trucks For Sale
i have ford f-350 tow trucks for sale ,runs great email me for pics thanks
Price: contact me for price
perez arauzo +346576897986-2
perez_arauzo@rediffmail.com

ID:234 Posted: 01/02/2007 REMOVE


Category: Trucks Wanted
wanted an ex-ambulance to convert into a camper must be in good condition.
Price: up to $12000
Luke
insightccs@hotmail.com

ID:233 Posted: 28/01/2007 REMOVE


Category: Truck Parts Wanted
I have a 79 SWB XLT, looking for a SWB tub in good shape to make into matching trailer, or a completed trailer, I am located in Victoria
Matthew 0431444848
vintagecaravans@iinet.net.au

ID:232 Posted: 23/01/2007 REMOVE


Category: Truck Parts Wanted
F1-F350 PARTS OR COMPLETE 1968-1979
Price: OPEN
dion peters 0438674129
donnellpeters@hotmail.com

ID:226 Posted: 01/01/2007 REMOVE


Category: Truck Parts Wanted
f1-f350 parts or complete 1969 -1979
Price: open
dion peters 0438674129

ID:225 Posted: 01/01/2007 REMOVE


Category: Truck Parts Wanted
Hi I require a cab In good condition for a F100 1976. Can anyone help out
Price: Neg
Colin 02 63360705
mecol@tpg.com.au

ID:223 Posted: 29/12/2006 REMOVE


Category: Truck Parts Wanted
Wanted a set of dual rims: 6 or 7 rims to suit a 1988 F250.
Price: ?
Peter Edwards 03 9717-3377
efiaustralia@msn.com

ID:220 Posted: 15/12/2006 REMOVE


Category: Trucks Wanted
Looking for 1986 F100 XLT LWB. red&white or blue & white .In reasonable condition .
Price: any
phil 0416147506
bildin@dodo.com.au

ID:218 Posted: 11/12/2006 REMOVE


Category: Truck Parts Wanted
does anyone know where i can get a billet style grill to suit a '79 f100
paul 0416293351
esh666@hotmail.com.au

ID:216 Posted: 02/12/2006 REMOVE


Category: Trucks For Sale
1973 F250 2WD, Dual Rear Wheels, Drop Side Tray, 6 cyl 240ci, runs well. Last rego 2004 - shouldn't need much for RWC. Matong, Sthn NSW.
Price: $2000 - Make an offer
Austin Evans 0427 277 906
ausdem@tpg.com.au

ID:214 Posted: 15/11/2006 REMOVE


Category: Trucks For Sale
82 F100 Ex-Ambo, 5.8ltr, duel fuel, air co, bonnet scoop, limo diff, great truck, number plates AMBO (will sell seperate) auto
Price: $6,990
Aaron 0410338113
trinatron@hotmail.com

ID:211 Posted: 14/11/2006 REMOVE


Category: Other
+++++Custom number plates for sale AMBO+++++
Price: $1,990
Aaron 0410338113
trinatron@hotmail.com

ID:212 Posted: 14/11/2006 REMOVE


Category: Other
+++++ custom number plates for sale PIG4x4 ++++
Price: $1,990
Aaron 0410338113
trinatron@hotmail.com

ID:213 Posted: 14/11/2006 REMOVE


Category: Trucks Wanted
F100,250,350,81-86,min rust,gd cond interior,running gear not important,paint not important,wanted for parts.
Price: neg
Brad 0422827881
ideaway@iprimus.com.au

ID:210 Posted: 05/11/2006 REMOVE


Category: Trucks Wanted
wanted to purchase ford f 350 truck with Tray tray lenght 3.5 meter or more used to transport water tanks, with quality tow bar, On Gas. Gas tanks in Date, 2 gas tanks around 200 liters per tank, must be good condition, Duel wheel. 2 wheel drive, Fitted with Air Conditioning. 6 cyclinder. 0r V8. Also long tralier to 11 meter in lenght wanted also.
Price: negotiable.
ian Wakeling 0741241961
herveybayqld@hotmail.com

ID:209 Posted: 26/10/2006 REMOVE


Category: Trucks Wanted
ford f-350 tow trucks
MICK 03 97074444
coonan@goldenit.net.au

ID:200 Posted: 23/09/2006 REMOVE


Category: Trucks Wanted
Iam looking for an ex-ambulance on gas so I can do it up.... no rego is ok. I will look at anything. If you have something, pls email me with pics or call me. Thanks.
Price: Cheaper the better
Steven 0415330928
parts_quote@yahoo.com.au

ID:199 Posted: 22/09/2006 REMOVE


Category: Truck Parts Wanted
I need a rear bumper bar for a 1984 LWB ute not too worried about condition as long as it isn't too bad.
Ian Black 0404 483 291
blackie@ecn.net.au

ID:192 Posted: 21/08/2006 REMOVE


Category: Truck Parts for Sale
1991 F150, wrecking. Complete 351EFI lpg, fair cond. $1800. 5spd gearbox, gc $1500. Power Steering Box $1500. Complete Cab Including Doors, Dash, Bench Seat,etc $2000. Aluminum Tray With Side $500. Bonnet $450. Guards $200ea.
kim reid 0418504893
jo.kim21@bigpond.com

ID:191 Posted: 11/08/2006 REMOVE


Category: (Please select one)
I just bought a 79 Nissan Skyline power steering box to convert my 1975 F100, this box is completely useless it is too short on the worm drive gear section that runs to the pitman arm. I need a Nissan 280C power steering box which has the long worm drive gear body running to the pitman arm. Can anyone help?
bill
wildbill1860@hotmail.com

ID:189 Posted: 05/08/2006 REMOVE


Category: Truck Parts Wanted
i'm looking for a set of tail light for my 1998 f150 styleside. and also front signal light (corner light) left and right.
Price: ??????
lui sy
luisy_cars@yahoo.com

ID:181 Posted: 04/07/2006 REMOVE


Category: Truck Parts for Sale
complete 1982 f100 front end, VGC. suit up to 1985 (or more, i havent researched it any further) includes: head light surrounds, grille, chrom bumper and the little silver inserts that frame it all.
Price: make an offer
Theres 0405591359
champion_orange_juice@hotmail.com

ID:180 Posted: 26/06/2006 REMOVE


Category: Truck Parts for Sale
COMPLETE TUB for sale, off 1982 f100 LWB (suit 1980-1985, at least!), working tail lights, tail gate, not dints, in great condition. selling due to making a custom tray so i can tug my goose neck along.
Price: 1000ono
Theres 0405591359
champion_orange_juice@hotmail.com

ID:178 Posted: 19/06/2006 REMOVE


Category: Truck Parts Wanted
looking for stepside/flairside tray for f100 swb or just the fenders. Ford,Dodge,Chevy doesnt matter.
Price: good price offered
Leigh 0438177200
crislee2@bigpond.com

ID:175 Posted: 10/06/2006 REMOVE


Category: Truck Parts Wanted
Hi all I have a 1978 F100 4x4 with a 351 and 4speed auto. Looking to change to 5speed manual, if anyone can help out with info or has a sell or swap.
Price: Open
Shane 0438171854
tasmin03@bigpond.com

ID:169 Posted: 16/05/2006 REMOVE


Category: Trucks Wanted
Hi, Im Looking to trade a FORD EF 95' Falcon (Great COND) for a F Truck, 76-81 Would be good, Auto is a must, Good Condition and running even better! Please Phone me on 0423 351 962
Price: EF Falcon
Dylan Shepherd 0423 351 962
dylan@ecap.net.au

ID:168 Posted: 09/05/2006 REMOVE


Category: Help Wanted
Looking to convert a 90 model F350 from LHD to RHD, after some advice and also approx cost of having someone do the conversion, OR price for a conversion kit, OR prices on a wrecked RHD F250/F350 that I can use the parts from to convert to RHD myself? Can I use a Australian RHD F350 from the 80s to convert a 90 model? Thanks for any help. :)
Cam 0403 393 203
cam@greatlakesonline.com.au

ID:166 Posted: 30/04/2006 REMOVE


Category: Truck Parts for Sale
4 Sale 2 Brand New Door trims and Arm rest pads, Tan in colour to suit 80 to 86 Ford Bronco $500 Also Very nice Dash Fascia and Radio bezel XLT $125.00
Price: $500 door trims & $125 dash fascia
Chris 02 98207526
redcloud@bigpond.net.au

ID:163 Posted: 26/04/2006 Expires: 07/04/2029 REMOVE


Category: Truck Parts for Sale
F series 1980-85 bonnet in good condition for sale
Price: $450.00
Kevin Doyle 0398532384
wexpaw@hotmail.com

ID:160 Posted: 23/04/2006 REMOVE


Category: Truck Parts Wanted
FOR A 1977 F350, looking for a overdrive jap g-box, to replace 4 speed.Will make adapter plate. Any ideas or info appreciated, chez
Price: open
ROGER 0427422732
cobbinasia@hotmail.com

ID:159 Posted: 21/04/2006 REMOVE


Category: Trucks For Sale
'82 LWB Duel fuel F100,6 cyl very reliable,new diff,12 months rego (Vic),waterproof lock up canopy with 10 foot roof rack,electric brake controller,bull bar, driving lights,duel batteries,overall very good condition,would require very little for RWC,selling as wife has bought bigger horses and float and I need more cubic capacity to tow the things
Price: $6500.00 ono
Tony 0425 757 112
tpennack@kwikkopystkr.com.au

ID:157 Posted: 19/04/2006 REMOVE


Category: Trucks Wanted
351 LWB preferred,duel fuel, good nick-in victoria
Price: upto $8000
Tony 0425 757 112
tpennack@kwikkopystkr.com.au

ID:155 Posted: 19/04/2006 Expires: 06/05/2015 REMOVE


Category: Trucks For Sale
For sale Al tray for F150 1991 excelent condition only 6 mts old
Kevin 0421549495
p_kevin25@yahoo.com

ID:153 Posted: 11/04/2006 REMOVE


Category: Truck Parts Wanted
Wanted a well body for a EX ambulance 1991 F150 .Has a AL tray now in Very good condition only 6mts old.Will consider a swap or buy a well body .
Kevin 0421549495
p_kevin25@yahoo.com

ID:152 Posted: 11/04/2006 REMOVE


Category: Trucks For Sale
1969 f-100 2wd short bed v-8 automatic dual exhaust runs and drives good body straight real good shape $1500..00 or trade? 205-425-2222 or 533-5382
Price: 1500.00
james haney 205-425-2222
jhaney290@bellsouth.net

ID:151 Posted: 03/04/2006 REMOVE


Category: Trucks Wanted
Hi Looking for F100,F150, or any well body or style side 1984 onwards single dual or extra cab
kevin 0437886388
p_kevin25@yahoo.com

ID:148 Posted: 20/03/2006 REMOVE


Category: Truck Parts Wanted
need full trim and front from anything newer than 1980, but in good condition. have an 85 f350 with rusty guards and trashed interior, would like to modern it up if possible, otherwise just restore it. please email me with what you have and how much you want. also looking for an alloy tray to suit. thanks in advance.
Price: negotiable
Aaron
aaronp@australianwastemanagement.com.au

ID:144 Posted: 12/03/2006 REMOVE


Category: Trucks For Sale
F100 ute 1984 4x4 swb reg 04-06 not running gearbox died,
Price: best offer
KEITH 0410067647
harley63@aapt.net.au

ID:143 Posted: 11/03/2006 REMOVE


Category: Trucks Wanted
1978,swb,4x4,f100,v8,auto,bench seat,duel fuel,power steer,aircon,road worthy,big lift and tyres
Price: 7,000 o.n.o
percy 0418516377
percym@vic.australis.com.au

ID:142 Posted: 28/02/2006 REMOVE


Category: Truck Parts Wanted
I,m looking for an aluminium tray for a 1982 F100 LWB. Also sides and back incase i find a tray without sides
Price: whatever is reasonable
Phil Cooper 0411 038 338
photophil@hotmail.com

ID:139 Posted: 10/02/2006 REMOVE


Category: Truck Parts Wanted
I'm looking for a dash & dash pad from 61-66 & 67-72 F-series
Price: neg.
Ron Carver (770)654-0765
tex2046@yahoo.com

ID:133 Posted: 16/01/2006 REMOVE


Category: Trucks For Sale
Two cars available. 1. 1984 F250 Ute with aluminium tray, warm 351 C6 on gas, not power steering, white and tidy. 2. 1984 F100 Ute 4WD with no tray, 351 manual, 8 stud wheels. Both cars currently unregistered but RWC and reg could be arranged for interested person.
Price: Approx $4k and $10k ono
Andrew
melindae@dodo.com.au

ID:131 Posted: 21/12/2005 REMOVE


Category: Truck Parts for Sale
1969 f100 bench seat reasonable condition, black vinyl with grey cloth inserts. Price negotiable. Melbourne (west)
Price: $200
Paul 0438630725

ID:128 Posted: 11/12/2005 REMOVE


Category: Trucks Wanted
1980 to 1986
Price: 15000
col 0407644142
am10@bigpond.com.au

ID:125 Posted: 20/11/2005 REMOVE


Category: Trucks Wanted
LATE 80's onwards EX AMBULANCE WANTED Were after an ex ambulance for a Youth impact vehicle in good condition for a donation OR really cheap price as we are extremely low on funding for this venture, were run by several local Youth pastors and young adults, and were wanting it to use for us to go into highschools and talk with Teens during lunch times, and be a positive influence on todays teens. Please any help or donations even would be more than greatly appreciated. Bless ya and thanks again. Scotty D!
Price: ?
scotty daniels 0414630845
scottyman125@hotmail.com

ID:124 Posted: 18/11/2005 REMOVE


Are you selling an F-Series truck or parts, are you looking to buy one, or do you need help with a problem?

Fill in this form and it will appear on this page.

Your name Your name as you would like it to appear
Phone Number Contact phone number (optional)
Email Email address (required but you can choose not to display it)
  Don't show my email address  
Category Please choose one or suggest a new one in the description
Description Details about what you are selling or what you want to buy
Price Price, price range, offers, ono etc
Expires dd/mm/yyyy (4 digit year)*
Does not expire
You can set this notice to delete automatically at a predetermined
date or you can delete it manually when it is no longer required.
Password To delete this notice manually you will need this password.

Terms and conditions

This is a public notice board for use by F-Series owners and enthusiasts to exchange information, advertise vehicles and parts for private sale, or request parts or information.

You may not advertise business related products or services on this notice board. Please refer to our advertising section for free business advertising.

 You may not post offensive, inappropriate or illegal material on this notice board. Any such posting will be removed by our administrators without notice. If you are offended by a posting please contact our administrators.

You may not use HTML (HyperText Markup Language) in your posting to create links to other sites. Simple text formatting is allowed.

fseries.info reserves the right to remove any posting's at our sole discretion.

 fseries.info, it's owners, employees or affiliates do not accept responsibility or liability for damages caused as a result of you or another user submitting to this notice board.

You must enter a valid email address OR a valid phone number so that you can be contacted by readers or our administrators. Anonymous postings will be removed.

If you do not specify an expiry date, an automatic expiry date will be applied. At present the automatic expiry date will be 12 months from the date of posting, however this period may change without notice. If you tick the "Doesn't expire" box you MUST enter a password. This password enables you to remove the posting at a later date.

* Expiry dates MUST be in the format dd/mm/yyyy where the year is four digits (ie 2007 not 07). Invalid postings may be rejected or "lost" in the system. If your posting does not appear try re-submitting it and double-check the expiry date.

Postings cannot be modified once they are submitted. If you wish to change a posting you must delete the original and re-submit it. If you did not enter a password you will not be able to delete the original post. In this case re-submit your post and email us so that we can delete the original.

The notice board does not currently support images. This functionality may be added at a later date.